Follow

Enable Guest Sessions Reporting on your Transmitter

Add your LRS transmitter to you account in LRS Connect to collect Guest Sessions data for review and analysis.

Screen_Shot_2017-05-17_at_10.01.15_AM.png

Log into LRS Connect, select the applicable location where you'll be using the transmitter and then click on Add a Transmitter and enter the Transmitter Device Code on the transmitter by following these steps:

     Step 1 - Press Setup button

     Step 2 - Press in code - 56789

     Step 3 - Press 1 System

     Step 4 - Press 2 LRS Connect

     Step 5 - Press 1 Device Code

     Step 6 - Press F1 (SET)

     Step 7 - Enter the 10 digit code and then F1 (OK)

     Step 8 - Transmitter will display, "Checking Server, please wait"

     Step 9 - Transmitter will display, "Success!"

     Step 10 - Transmitter will display, "Success!" Press F4 (EXIT) to return to the main menu or continue pressing until you are out of the settings.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk