LRS equipment is made from industrial-strength, polycarbonate material. However, this material is susceptible to hairline cracking if non-approved cleaners are used. When cleaning LRS equipment, we recommend only using ISOPROPYL ALCOHOL CLEANERS that do not contain chloride and chlorine derivatives.
*** The Main ingredient to Avoid in the cleaning products you are thinking about using is Ammonium Chloride. Hand Santizers and Chlorox wipes have this ingredient and will Damage your pagers.
To confirm your cleaner, you may submit a list of ingredients and the MSDS sheet to support@lrsus.com and we will research the cleaner and provide approval.
The following guidelines can be used to clean any LRS Equipment:
1. Take a clean soft, lint free cloth and an isopropyl-alcohol based cleaner.
2. Wet the clean cloth with the isopropyl alcohol cleaner.
3. Wipe down the equipment frequent, based on usage.
4. When dry, place equipment back on charge.
Cleaning equipment with any other non-approved cleaners can weaken plastic, cause it to become brittle and cause hairline cracks. LRS equipment that is cleaned with unapproved cleaners and suffer cracking will not be covered under warranty.
Do not submerge LRS equipment in any type of liquid as this will also damage the equipment and is not covered under the standard warranty.