Place rechargeable pagers on the charger and let them charge for 8 hours prior to first use.
Rechargeable pagers should be kept on charge even during extremely long periods of inactivity (3 to 6 months).
If Pagers are out of use for longer than 3 to 6 months, would be best to have them on a rotating schedule so the pager batteries will still experience an add and drop in power getting tested regularly / weekly.
POWER SUPPLIES:
GUEST PAGERS (aka COASTERS)
Only 12 Volt DC power supplies should be used with LRS DC chargers. The previous model AC power supplies will affect the charging capability for this pager type and could cause damage.
The NEW DC Coaster Chargers were released in June 2021. Please note that you cannot mix and match charger pieces. Use only the 12 volt DC power supply with DC charger bases. And only use the 10 Volt AC power supply with the older model AC charger bases.
If you have any questions about the equipment you have, and identifying which type it is, please contact LRS Support via support@lrsus.com OR call our team at 800.437.4996 for immediate assistance.
OTHER PAGER TYPES
For all other LRS rechargeable pager types, only 12 VDC power supplies should be used. AC power supplies may work, but the DC power supply adapters are sold with the chargers to ensure enough power will be supplied to the pagers.
Should you have any questions, please contact LRS Customer Support via support@lrsus.com OR call our team at 800.437.4996 for immediate assistance.