This software provides the ability to update settings for several LRS push-for-service devices. Create custom messages that are delivered via LRS Guest Alpha Pagers or Staff Messaging Pagers. Tailored messages help better manage communication between staff and/or guests. This software is only applicable to LRS push-button devices including the Butler XP one or two button, Pronto-1 or Pronto-6, and Table Genies.
* You will need a Windows computer for this software, to program the Push for Service devices.
* These devices are not Apple compatible.
Accessing the LRS Push-for-Service Programming Software online:
Select a PC with Internet access and runs on Windows. Connect the PC with the push-for-service device(s) - Prontos, and Butler XPs & Table Genies - to update the programming. Download the Push-for-Service Programming Software below. Please make sure to download the correct file based on your version of Windows.
Windows 10 and Windows 11 users
NOTES: The Butler XP will work on Windows 10.
** The Prontos are compatible with Windows 10 and Windows 11.
*** The Butler 2 Button XP devices only work with Windows 7. This is a much older device.
WINDOWS 10 and WINDOWS 11 users:
1) LRS PROGRAMMER software - version 1.7
Unzip the file, and double-click the Application file to launch the program.
2) Additional Driver Required: DOWNLOAD
* Notes pertaining to both downloads: you do Not want to try to install the program from the zip folder, it must be extracted first *
_____________________________________________________
1) How to install the LRS Programmer:
Click the link above and it will save a zip file to your Downloads folder called LRSProgrammer_1_7.
- It will likely save to your Downloads folder.
- Next, create a new folder on your desktop. Call this folder Pronto Programmer
- navigate to the downloads folder on your Windows computer.
- click on the new zip file one time to highlight it blue, you do not want to open it.
- Right click to see several options, then choose Extract all.
- Note: Sometimes on a Windows 10 computer, there will be an Extract All option in the upper portion of the screen, if you are not seeing this option from the list of options on the right click.
- When you click on Extract All, it will let you navigate to your new Pronto Programmer folder for where to extract the files to.
- Once completed, go to your new Pronto folder, locate and Double Click on the application file to install the program.
- The application file needed is located towards the bottom of the list of files
- The correct file you are looking for has an LRS Branded logo and says LRS LrsProgrammer
* Note: you do Not want to try to install the program from the zip folder / it must be extracted first*
2) How to download and install the Additional Driver needed
** First - Close the LRS Programmer 1.7 software if you have it open. Better to have this closed, install the driver program and then open the LRS Programmer software when completed.
- Back to the driver --> When you click on the download link, it will take you to Dropbox. No need to sign in, just X out of that little screen.
- You will see a list of files -- this is what you will get when you download the program.
- Just ignore the list of files and go up to the Top Left or Top Right (depending on where you see this icon) and click on the icon that shows an Arrow pointed down and a Straight line below it.
- Click on the icon and the Driver program (TTPROG.ButlerXP) will download a zipped folder to your Downloads folder on your computer.
- Go to your desktop and create a new Folder - name it Pronto Driver
- navigate to the downloads folder on your Windows computer.
- click on the new T3PROG.ButlerXP zip file one time to highlight it blue, you do not want to open it.
- Right click to see several options, then choose Extract all.
- Note: Sometimes on a Windows 10 computer, there will be an Extract All option in the upper portion of the screen, if you are not seeing this option from the list of options on the right click.
- When you click on Extract All, it will let you navigate to your new Pronto Driver folder for where to extract the files to.
- Once completed, go to your new Pronto Driver folder and double click the application file to install it.
- There are 3 folders and an Application file. Double click the application file.
- Go through the whole install --> next, next, next, continue, continue....
- Do not choose and select options on where to install the program.. Just let it install to the C Drive, program files / the default location. Next and continue all the way through.
- At some point you will see the driver you need to install. It is Best to install this whole program. Don't just go to the driver and try to install that by itself. A Windows 10 computer can make it extremely difficult to just install a driver. This whole setup here is designed to make this easy.
Once the install is complete, you do not need to open this program. You will never need it. You just installed it for the driver. As it is an LRS Program, it is not going to hurt your computer or anything about it by being installed to your computer. It can always be uninstalled if you want to remove it.
* Note: you do Not want to try to install the program from the zip folder / it must be extracted first*
___________________________________________________________
Windows 7 users:
DOWNLOAD (link will take you to a Dropbox screen, click on Download on the top right corner)
Unzip the file, and double-click the executable file to launch the program.
This software is compatible with the following products:
- Butler XP (access programming user manual for further instructions)
- Pronto (access set-up guides for further instructions)
** If your PC is not recognizing the USB programming cable, you may get a prompt asking for a driver for a “CP2102 USB to UART Bridge Controller”. You will need to download and install the universal USB driver here.