This software provides the ability to update settings for several LRS push-for-service devices. Create custom messages that are delivered via LRS Guest Alpha Pagers or Staff Messaging Pagers. Tailored messages help better manage communication between staff and/or guests. This software is only applicable to LRS push-button devices including the Butler XP one or two-button, Pronto one or six buttons.
Accessing the LRS Push-for-Service Programming Software online:
Select a PC with Internet access and runs on Windows. Connect the PC with the push-for-service device(s) - Butler XPs, Prontos - to update the programming. Download the Push-for-Service Programming Software below. Please make sure to download the correct file based on your version of Windows.
Windows 10 users:
PLEASE NOTE: The 2 button Butler XP is not supported on Windows 10.
Additional Driver Required: DOWNLOAD
Programmer: DOWNLOAD
Unzip the file, and double-click the executable file to launch the program.
Windows 7 users:
Programmer: DOWNLOAD (link will take you to a Dropbox screen, click on Download on the top right corner)
Unzip the file, and double-click the executable file to launch the program.
This software is compatible with the following products:
- Butler XP (access programming user manual for further instructions)
- Pronto (access set-up guides for further instructions)
** If your PC is not recognizing the USB programming cable, you may get a prompt asking for a driver for a “CP2102 USB to UART Bridge Controller”. You will need to download and install the universal USB driver here.